Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a Primary site A and a DR site B. I have a branch site H which has 2Mbps link to A and a new commisioned 1Mbps link to B. There is 20Mbps link between A and B. All 3 routers are using EIGRP.My requirement is that from H's LAN all data/applicat...
Hi,My problem is with an ISDN PRI. Whenever I fire an ISDN line to any remote site.....It always connects to the remote site using the 30th channel instead of taking random channel. I didn't find any prob with config.......have anyone faced this kind...
Well, there's nothing wrong in your method of appending lines in the existing ACL. What IOS version are you using?Can you try re-applying the whole ACL access-list command.
ACLs are checked from top to bottom. When you ping 10.1.x.x network, ACL 30 still gets matched and the since this ACL is associated with the first NAT statement, NAT takes place as per the first NAT statement.The router has no way of knowing when to ...
hi yogesh,thanks for the config.one thing, the acl mentions the subnets from LAN to the destination. This would in turn match all traffic..data as well VC traffic becoz the VC equipement is in the same LAN at branch site.i need to match the acl as pe...
Thanks Yogesh for the EIGRP solution.Can you help me with the access-list that I can use to match Video conferencing traffic? I will use this ACL in the route map.
