Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have decide to implement mesh topolgy wireless network..can anybody help me to resolve this probs..My scenario is1)Ther are 5 access point which will interconnect to each other,and it will choose which one is best pathway.2)Only one UTP connection ...
Since 2 days I was trying to recover the password of 7206 router,we are using SUP11/MSFC2 card in the router,the card model isCAT6K-MSFC2.IOS version is :c6sup22-psv-mz.121-11b.EX1.bin.can any one help me to do password recovery procedure for this sc...
Hi all,Here is how I want the configuration; I have one DSL router and one Cisco 1721 router. My concern is how I can configure VPN through these two routers.I have attached a picture file called Net Diagram which says my current scenario. And I have...
Hi all,We are facing an issue with 7206 vxr router,since last 2 days the router is rebooting every 3 hours and its going to rommon mode after that we are not able to do anything,pls find the loggs below..Cisco Internetwork Operating System Software I...
PBR is used to make routing decisions based on policies set by the cisco router.Here is the sample config :hostname core_testing!interface Ethernet0/0 ip address 172.16.10.6 255.255.255.0!interface Ethernet0/1 ip address 172.16.64.6 255.255.255.0 ip ...
You can go through the below mentioned links for referencehttp://www.cisco.com/univercd/cc/td/doc/product/vpn/solution/aswan15/sig/sig_05.htmExample :http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a0080094bff.shtm...
Just go to router enable mode and type this command.You can able to see the CPU type and speed.Router#show processes cpuswitch#show processes cpuRegdsSaji k.sNetwork consultant
