Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello All,I have a WLC 4402 with 20 AP's. I currently use it only for my internal Lan and everything works great.I would not like to add "Guest Wireless" SSID, so I connect a Cisco PIX501 to the second port. For what ever reasonI have no Layer two co...
Hello All,I have an existing vlan 333 that I use for a data network and pull dhcp requests from a MS Server, works perfectly.I have created a new voice vlan 334 with an ip-helper pointing to my dhcp server. I have setup the new scope on the server, b...
Hello All,I have a 5510 protecting a single MPLS site. I am trying to configure some new rules to allow traffic to flow into the ASA but looking at the logging everything is being denied by a implicit rule.How can I get past these implicit rules ?sam...
I am creating a 3750 switch config. I want to have two Vlans, one for data and one for voice. How do I seperate these and how does the switch knowto use Vlan X for voice and Vlan Y for data ?CheersColin
Hello All,I currently have a WLC4402 in my HO with approx 20 AP, my AP's register with the WLC using a DNS lookup with CISCO-LWAPP-CONTROLLER static entry.I would like to install a second WLC and 20 AP's in a Remote location, how can I configure the ...
Hey Guys,The Pix is a 506e and yes its a 10/100 no 1000.Wow this is a big discovery, thanks guys. I also have an ASA here which I will try, I will let you know how that works.Colin
George - Yes this is correct, the L2 is the switch. I can confirm that the switch and pix are working properly, because if I plug in my laptop into any port on the switch I can get internet access through the pix. When I plug in port 2 from the WLC, ...
So I added the L2 switch in between the Pix and WLC, but I am still having the same issue. I am still unable to ping the interface.Whats really odd, if I connect a laptop with a static ip to the second interface on the WLC I can ping fine. But if I c...
