Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am trying to setup EZVPN to carry a GRE tunnel to a remote site so I can utilize EIGRP over this tunnel. The VPN is working fine however I can't get EZVPN remote to create any dynamic ACEs for my internal loopback for the GRE tunnel on the client ...
I have been looking to see if PIX 6.3 has the same capabilites as listed in the following link.http://www.cisco.com/en/US/customer/tech/tk827/tk369/technologies_white_paper09186a00800d6979.shtmlBasically we deploy IPSec tunnels to various clients, on...
Brett,Thank you for the suggestion, I actually started doing the custom transciever shapes on my own, the other data will help and I will take a look at your product.What about the N2K-C2248PQ, if you don't have an order for that one make sure to bri...
Hi Brett,Maybe I am missing this, but have you attempted to produce a stencil of all known SFP, SFP+, QSPF+ and CPAK transcievers? I'm in the midst of building an entire new data center and Visio offers a way to visually devlop a bill of materials b...
Old post here, but TAC is wrong. It's not a bug, this is by design. You have loaded the low memory packages for older switches with 16MB flash.From 12.2(53)SE1 release notes:"with device manager Express Setup files only. This image is intended for ...
Don, thanks for posting your configurations below, this helped me sort out the same exact issue running on an 871 with 15.0(1)M1. However I found that the loopbacks (unless you are using them for something else) were not nescessary or could be due t...
