Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,As far as I know, for regulatory reasons, it is necessary to create a separate organization at https://account.meraki.cn/ for locations in mainland China.I have a customer who runs several sites in China and connects these to Europe via MPLS. ...
Hi,you can also check if your carrier provides another APN that‘s not behind a CG-NAT and change your cellular gateway to it.This way you don‘t need to configure any manual NAT traversal rules.
Hi,it‘s a Firewall. You can create interfaces on it for routing and use those for talking to internal services.Take a look here: https://documentation.meraki.com/General_Administration/Monitoring_and_Reporting/Syslog_Server_Overview_and_Configuration...
What could be possible is that dhcp snooping is enabled and not trusted on the AP port…I‘ve had DHCP issues with all kinds of Meraki APs (Catalyst 916x aswell) by not allowing „all vlans“ but instead only allowing the specific SSID VLANS on the switc...
Hi,if you want to achieve a good rf design (it's not all about signal strength) you should consider talking to a wireless consultant which can do a professional wi-fi site survey. Here is a pretty nice Meraki documentation page covering all important...
Hi,so first of all - it sounds like you are using Non-Meraki VPN instead of Meraki Auto-VPN. Can you confirm that?Having identical VLAN IDs/IP Subnets on both ends is not a problem as long as you don‘t route them into the VPN tunnel.Can you provide a...
