About nigholder

nigholder · 08-15-2009

I have an SPA3102 setup as a Local Access Number line on the PSTN port. I can call the PSTN number and it will answer and route the call through the virtual number connected to the port to my VSP and I can call an overseas number. But when I call the...

nigholder · 10-28-2009

Hello BIll,Attached is my configuration files.

nigholder · 10-27-2009

The article specifically states that it does not answer my problem in the third line. I was able to solve my problem by modifying the dial plan in Line 1.I added <9:><:@gw0>, after dialling 9, I get dial tone after a short while and I can dial local ...

nigholder · 10-19-2009

Thanks for the help, I discovered what my problem was after programming my smart phone with an account from my VSP. I was trying to call from and to accounts on the same IP address. When I went by a friend and called it worked. Thanks again.Is there ...

nigholder · 09-22-2009

I would like to get dial tone when I call the IP side so I can call an analog number. When I call it jsut answers and I get not prompt. I can program a number to forward the call to and that worksl, But I want to be able to choose the number I want t...

Member Since	‎08-28-2009 06:12 AM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	6

User Statistics

User Activity

SPA3102

Re: SPA3102

Re: SPA3102

Re: SPA3102

Re: SPA3102