I have configure a cisco 861 as vpn server. I could you some help if someone can tell what's wrong? Clients can connect, but cannot access local lan resources for subnet 10.0.10.0Building configuration...Current configuration : 9770 bytes!version 12....
I would like to know if there is something I can do to allow wireless traffic to the local LAN. My config is attached. i have Vlans 1-5, 1&2 are for the lan, 3-5 are for wireless. I cannot access resources on the LAN with either.
When setting up an 1811 and a 1200AP. I have configured 3 Vlans 1, 11, 21 on the AP and router. With the Vlans being the default-router for 3 DHCP scopes. Is this the best solution or is there a better one?
No, the wireless is still configured, I just removed the bridging, and the network performs great. The appropiate Vlans are segmented and protected, Thanks for you help .
Disregard,I figured it out.I removed the deny ip any 10.10.1.0 0.0.0.255.I do appreciate the help.access-list 111 permit ip 10.10.1.0 0.0.0.15 host 10.10.1.1access-list 111 permit ip any 10.10.1.0 0.0.0.255access-list 111 permit ip 10.10.1.0 0.0.0.15...
