About jose-padilla

jose-padilla · 07-05-2024

I have a C9300L as the Core switch where I have the interface vlans configured for the L3 and I have some C9200L as the access switches for the end users.In the Core C9300, I have the DHCP server and the pools configured and some users are not receiv...

jose-padilla · 07-08-2024

The 9300 is my Core switch where I have the interface vlans created and the dhcp pool. I dont have dhcp relayThe 9200 are the access switches that are conected via trunk to the Core.

jose-padilla · 07-08-2024

Yes, I applied the commands to the correct interface vlan. I see that Directed broadcast forwarding is disabled by default.Vlan15 is up, line protocol is upInternet address is 10.3.150.1/24Broadcast address is 255.255.255.255Address determined by non...

jose-padilla · 07-08-2024

Hi Richard,Yes, is an unusual event because I have users in the same access switch working without problems and others that have the problem. Not always are the same users, and after a few retries of flushdns in the PC or reconnect the cable several ...

jose-padilla · 07-08-2024

Hi MHM,See the result of the command, in the Core I see the ICMP Redirect and BROADCAST Queue Drops increase on the Core, in the access switches I dont see the counters increase (Queue Drop is 0)C9300L_CORE#show platform hardware fed switch active qo...

jose-padilla · 07-08-2024

Hi BalajiI have a Core device connected directly to all access switches in a star topology (see attached)There are more vlans, also with the same problem. All the dhcp pool are created in the Core.We are using version 16.12.3aDHCP snooping is not ena...

Member Since	‎07-03-2024 01:24 PM
Date Last Visited	‎07-04-2024 01:23 AM
Posts	8
Total Helpful Votes Received	2

User Statistics

User Activity

DHCP request in C9300

Re: DHCP request in C9300

Re: DHCP request in C9300

Re: DHCP request in C9300

Re: DHCP request in C9300

Re: DHCP request in C9300