About julian.hanzlik

julian.hanzlik · 08-16-2016

Hi guys! I hope this is the correct thread .. I'm currently switching from a 100Mbit network to a 1000Mbit network. I have setted up two VLANs for testing. Wanted to see how "fast" it will be and created a 20GB file and transferred it from PC-A to PC...

julian.hanzlik · 06-01-2016

Router: Cisco 1812 with version 12.4 I have an inside Server where i need to open several Ports for outside.I have a NAT configured before for other servers. Like this, this is a Webserver, reachable through the outside. Like this here: ip nat inside...

julian.hanzlik · 02-29-2016

My problem is, i can't connect to my ASA over Console.This is what i have done:I wanted to clear my startup configuration. So i entered the following command:> write eraseThen it asked me if i want to clear my configuration. I pressed Enter. Everythi...

julian.hanzlik · 08-23-2016

I have all oportunities, because the network isn't live yet. I'll give it a complete test in an hour. I'll share the results here. And one hour equals one day here. I've tested following and I figured out, that the cable is maybe the bottleneck, be...

julian.hanzlik · 08-22-2016

Hi Prabath, Thank you for your reply and for sharing your knowledge! It really helped me out and show me the way where I have to search for expending my knowledge. BUT what I really don't get is, yeah the TCP window size etc. have influence to the s...

julian.hanzlik · 08-17-2016

Thanks for your reply Prabath, I will check iperf and test it with this tool. Thanks. But if I will never get more than those 200Mbit while transferring a file, when should I then get it? Transferring a file is in my opinion the only reason I would ...

julian.hanzlik · 02-29-2016

It stays completely empty. Completely Nothing shows up. Therefor I ordered a new USB-to-Serial Adapter Cable, because I thought this is the problem, but with the new one I can enter my old router without troubles. Only the ASA output stays completely...

julian.hanzlik · 02-29-2016

I can't post the configuration i did, because i don't have access to it. But i followed this Turtorial:https://networkingdocs.wordpress.com/2010/08/09/allowing-https-access-for-asdm/The ASA shutted down while entering the IP. So the only configuratio...

Member Since	‎02-29-2016 05:30 AM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	9

User Statistics

User Activity

Bandwidth Issues

Open several ports from outside to inside server

ASA 5512-X console not working?

I have all oportunities,

Hi Prabath,

Thanks for your reply Prabath

It stays completely empty.

I can't post the