It looks like you have at least 2 vlans on your switch. Since there are two vlans on your switch, the broadcasts are coming in on vlan 382 from the TLWR740N, and are forwarded to your dhcp router. Since the switch is associating the broadcasts with v...

Also, I spoke with one of my colleagues and they suggested that you can open a ticket with your ISP and have your ISP loop test the Smartjack and CSU. Thanks,

Hello, Since the Layer 2 protocol is down, it seems that the channel group setting on S0/1/0 could be causing the issue.S0/0/0 shows that its state is fractional, so it could be not using all of the channels for the whole T1 line. The LCP type of the...

Hello, After analyzing the TP user guide for the TLWR740N, the problem might lie either in how you have the wireless router connected to the device, or how you have the WAN connection type set up via the router's GUI interface. Are you connecting the...