Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All, I´m suffering on a WS-C3750X-48 (IOS c3750e-universalk9-mz.122-58.SE2.bin) output drops on an interface.I think that is due to high load on the interface. However, this is not my problem, the problem is that the value of output drops makes v...
We have our devices configured to save the config on a tftp server, with these commands: switchTest#show runarchivepath tftp://10.216.141.156/switchTest-write-memory I want to change this configuration, because our colleagues from server departament ...
Thanks for your help, but I don´t need to troubleshoot the "output drops", I need to know why in the same second I see such a huge difference in the value.
Any specific reason why you don't use Prime's build auto-archive configuration? --> We are not Cisco Prime admins, we can do many tasks, but we do not have access to config on Prime. Regarding the link, it solved my problem! Thanks a lot!!
