About Greg Jaubin

Greg Jaubin · 03-23-2014

Hello all,I'm implementing some new Telepresence devices:Site AVCS-Control (X8.1)VCS-Expressway (X8.1)MCU 5310 (4.4)C40 codec (7.0.2)Site BC20 codec (7.0.2)Different subnet from site AI've enabled H.323 & SIP on the VCS-C and have tested multiple ca...

Greg Jaubin · 03-24-2014

Nick,I confirmed with the customer that the endpoints couuldn't ping each other. I don't totally know what caused the problem. They said that there was a small network switch between the C40 and wall jack. They removed the switch and now the calls 10...

Greg Jaubin · 03-24-2014

You need Jabber licenses on the TMS. You also need to install TMSPE which is an extension to TMS and add provisioning capability. This will be how you create user accounts via templates you can download from Cisco. On the VCS-C you point to the TMS a...

Greg Jaubin · 03-23-2014

Nick,You were right! The systems can't ping each other. Thank you so much. Now i can present this to the customer and have them take a look.I'll keep you updated.Cheers!-Greg

Greg Jaubin · 03-23-2014

Nick,No I didn't. I don't see a ping utility on the C series codec. The codecs can connect to each other on H.323 to SIP calls. -Greg

Greg Jaubin · 03-23-2014

Thank you Wayne,I just unregistered both endpoints from the VCS-C and made IP to IP calls and they didn't work (either direction). However calls to the MCU which is at the same site as the C40, but one a different subnet went through. This is certain...

Member Since	‎10-05-2012 11:42 PM
Date Last Visited	‎04-19-2019 11:14 AM
Posts	13

User Statistics

User Activity

Non-Traversal calls issues

Nick,I confirmed with the

You need Jabber licenses on

Nick,You were right! The

Nick,No I didn't. I don't see

Thank you Wayne,I just