Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all.
I'm a bit concerned now, because I by accident discovered that there is a difference between the startup-config and running-config on one of my WLCs.
I discovered this when I compared startup-config for two of my WLCs. For instance a co...
Hi all.Anyone have any suggestions as to what might be causing this: It seems that the drops in clients occur every hour. And yes... we've got reports of unstable wireless connections, but no one reports drops every hour.So my question is: are there ...
Hi all.I'll try posting my issue here before I post a TAC on this: Cisco CT5760 wireless controller running IOS-XE version 3.6.0. This issue is related to web authentication on an SSID with external web portal. It seems that the statement "virtual-ho...
Hello We are in the process of evaluating the Cisco ISE VMWare appliance with a view to replace our existing FreeRADIUS installation as authentication provider for our wireless network and VPN service. As a part of this we are hoping to migrate our u...
I've got a question regarding large amount of ARP-packets when enabling "Interface Groups" (aka "VLAN Select") on a WLAN.Currently we have an SSID with approximatly 12.000 similtanoius users during peak hours. These users are primarly students with l...
Hey again.
So I got in contact with TAC regarding bug CSCvi91017. And we confirmed that we were hitting it.
The workaround is quite simple:
- Add a new dummy FlexConnect group
- Save configuration.
When this is done all the missing FlexConne...
Thank you so much. That's probably it.
My main concern now is whether or not I loose the FlexConnect configurations for these groups when I reboot for an upgrade.
I'll try to extract my FlexConnect config from run-config and do a manual backup t...
My further investigations has not been able to give me an explanation for the differences, so I will open a TAC-case and let you know the outcome of this.
Here are details on this bug: CSCuq63532It appears to be fixed, but I fear that this is only for 3.3 releases.We have tried to upgrade to 3.7.2E, but we encountered another bug that results in all radios in shutdown. So we rolled back to 3.7.0.But th...
