Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I recently integrated Microsoft Intune with Cisco ISE 3.4 to check for device registration status and device compliance state. I am noticing some false result between the two integration. For example, ISE showing a device registration is false where ...
Issue:We have an endpoint with a PEAP Ethernet profile connected to port 5 on a Meraki switch. We have also configured the 802.1X access policy on the Meraki switch and applied it to port 5.When testing the RADIUS server from the switch, it successfu...
I'm facing similar issue....same scenario. Can you please expatiate how to do this. My setup is done as in the picture below. when I add the PSNs to the PAN, the certificates were imported to PAN. Since the PSNs are managed via the PAN, is your solut...
Hi Paul,I know this post is pretty old but your response is similar to an issue I'm currently facing. I'm still at the gathering phase, but i do have some questions. I want to deploy the agent via Intune. I don't want to use the client provisioning b...
I did further troubleshooting, and added more API permissions in the APP registration. Now I could see the mdm report showing the right status after granting more API permissions. However, despite that, the device was still granted wrong authorizatio...
Thanks @PSM for the response. First of, I am not doing certificate authentication, so there is no endpoint certificates. I enabled the legacy mac address. But, if ISE API query to Intune could not find a device, shouldn't it report that the device is...
