Hi, I got a customer with around 1000+ Cisco SPA 502 phones on our Broadsoft Broadworks Platform R21SP1. The phones are on 7.6.2. Phones are configured with Admin Password. I am trying to configure the Broadsoft Directory and configured the below i...

Hi, Just identified a bug in SPA122. The ATAs both 112 and 122 ( on Firmware SPA1xx_1.1.0_011.bin). ATA reboots when it gets 484 not found. This is causing serious issues in the field as the ATA reboots whenever the customer dials an invalid number b...

Hello, When we try to do a consult transfer using the BLF keys on console, nothing is happening. This is apparent only on newer H/W version 2.1.0. The firmware used is 7.4.9c. I have got a SPA525 on 2.0.0 h/w version in my lab and its working fine o...

Hello,I would like to program a soft key to dial a number and then pause 3 seconds and then send 2 digits then to prompt th euser to enter values, which will then should be sent. Is this possible in speed dial entry in Cisco SPA 500 series phones.Her...

Hello,I am configuring Cisco SPA family phones to work with my Broadsoft Broadworks Platform R16SP1. I am having a wierd problem where the MWI ( Message waiting Indicator) just comes ON whenever I reboot the phone.But there are no Voicemail SIP-Notif...