Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
receiving % Error in saving certificate: status = FAILwhen trying to import a certificate on ASA running 8.2. Certificate is a capf_trustpoint for Phone Proxy configuration.
I am trying to clear out all the trustpoints on my ASA to reconfigure the ASA phone-proxy. However, I cannot remove the ctl-file asdm_CTL_File.When I enter the command clear configure crpyto ca trustpoint I receive this error.ERROR: The trustpoint p...
Is it possible to direct websense through an EZVPN tunnel to an EZVPN Client to restrict access to certain websites? I have an ASA 5510 at our main office and an EZVPN Client (ASA5505) at a small home office connecting back to the main office by a c...
I have two 4507 Switches as the primary core and a secondary core in a separate buildings. The core's will connect to 3560 distribution/access layer switches. One connection back to the primary core and a redundant connection back to the secondary ...
I think you just solved my problem. Now, for each switch I would need to create that additional VLAN to route back to the core over the alternate link? Thanks again!
Ok, I got what you are saying here. I was trying to avoid this because it would force me to create multiple VLANS for each of the buildings plus the wired and wireless networks for the buildings on the core which would then have to be trunked to the...
Thank you for the information. My initial thoughts were that that release 12.2.(25) and up should allow for IP routing. In my current environment we are using static routes on the 3560's using 12.2.(37) Advanced IP Services. I didn't think it would...
