Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have 2 3750-x members in a stack running 12.2(58)SE2. I am able to console into the stack master, which happens to be the top switch, but not able to console into the 2nd member. I get the screen stating the console is available ...
We have 3750-X's with dual power supplies. When one of them is disconnected the NMS/Netcool is not picking up the trap. What MIB is needed to monitor the power supplies?Thanks
We are seeing timeouts, commands skipping, error message "command authorization failed' , and running very slow while running netconfig ad-hoc commands on 3750'sIt seems that many of the problems occur with the interface range command.We have aaa run...
Can someone explain why the default min thresholds for dscp are larger for the higher probability AF class than the lower probability classes?for example:http://www.cisco.com/en/US/docs/ios/qos/command/reference/qos_q1.html#wp1052917dscp 10 has min o...
in the v2 data sheet it statesThe Cisco Catalyst 3750 v2 Series Switches are capable of reverting to their internal power supply without any service interruption. In addition, the Cisco RPS 2300 can be managed by a Cisco Catalyst 3750 v2 Series Switc...
We found that by removing aaa authorization config-command has appeared to solve the problem. We run a job to remove the command and run the config changes then re-apply the command
yes, we are able to poll without issue.I did a test poll from CWCisco IOS Software, C3750 Software (C3750-IPSERVICESK9-M), Version 12.2(46)SE, RELEASE SOFTWARE (fc2)Copyright (c) 1986-2008 by Cisco Systems, Inc.Compiled Thu 21-Aug-08 15:43 by nachenI...
