Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I am wondering what the status of the query vlan interface means in the command 'show ft peer detail':Query Vlan IF State : UP, Manual validation - please ping peerI am pretty sure that I did not see this status when I configured query vl...
Hi all,I have the issue that my ACE does not seem to allow tcp options with L7 proxied connections to the servers. For the client side connection I see the TCP option timestamp for example, but unfortunately the ACE itself does not put the timestamp ...
hi all,we noticed considerable longer response times for https-sessions using advanced-balance ssl than accessing the server directly. we use a css 11501 (without ssl module) and in the worst case we see about 3-4 times longer response times with the...
Hi! I am a little bit confused about the configuration guides concerning csm + fwsm + csm bridged mode. in my opinion when using bridged mode with the csm i do not really need any alias ip configuration - neither in the client vlan nor the server vla...
hi all,we have a standalone content engine 565 running acns 5.3.1. we would like to realize something like a live stream 'relay': we place the ce on the network edge and it receives a live stream (rtsp) directly from a content provider. the internal ...
Hi,This issue is pretty likely caused by a Bug existing in NX-OS 4.x and 5.x: CSCti07871A workaround is to completely remove the SNMP community configuration and reapply only the necessary part.Regards,Daniel
Hi Gilles,In this matter I just realized that it even does not seem to be possible to configure a static route in context A for real server network behind context B pointing to any address that is active in context B. In fact you can configure the st...
Thanks Kevin!That is clear so far.The only downside I see is that in this situation only the remote side can trigger the tunnel-setup.What if the headend needs to send the first packet?That does not seem to be a perfect workaround for the redundant L...
Hi,I am facing the same problem as you.One thing that I am interested in: you are saying that using dynamic crypto-maps on the headend solved the problem.When I understand this correctly, then then the 2 redundant remote-routers at each site initiate...
Hi Gilles,Thanks a lot for that clarification - that helps me a lot. I'll talk to the Austrian account team in case the customer insists on it.Best regards,Daniel
