Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, I am having trouble with GLBP when we forced a failover to the 2nd router. First router is running normally but after adding the 2nd router and tried a failover, my core switch is not reachable. Is this a static IP issue or GLBP issue? I can ping...
Can I join a non-cisco portable wireless router to my WLC 5505? Or I can go to another route of setting up an autonomous AP1242G and use it as a bridge to connect to the non-cisco portable wireless router? We need a portable AP that uses power via ...
Hi,I just received a WAS-612-K9, old but new. Meaning this had been bought a year ago but was not configured. Now I have tasked of upgrading to a higher version. My question is, do I need a CM to configure the IP so I can download the new version or...
Hi,I would like to inquire if WS-X6408A-GBIC 8 port 1000mb GBIC supports single mode, I am currenlty using it for mulit-mode backbone and patch cord. I will have a new backbone, running single mode.thanks,edongskiu
Hi, I am planning to use all ports in my 6509 and I would like to inquire if I use all ports in a WS-X6408A-GBIC 8 port 1000mb, do I get a maximum port speed of 10000Mbps on each port? Does this share a backplane or the module has it's own? thanks!
sorry for the typo :) router1:ip address x.x.x.x. 255.255.255.252 secondary ip address 10.1.1.65 255.255.255.240router2:ip address x.x.x.x. 255.255.255.252 secondary ip address 10.1.1.67 255.255.255.240 core switch IP is 10.1.1.66; yes they belong to...
Hi Scott,So to test my options is setup a autonomous Cisco AP C1242 facing my LAN and setup another C1242/non-cisco AP as WGB and connect my equipment Once it works, my non-cisco will connect thru via WGBthanks in advance!
