Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
and how can I deactivate it. My switches are connecting to the following IPs and fail because we are using SSL interception so I can see this failed connections...What is it for and where is it switched off? IPs:18.205.167.734.192.246.1018.205.127.81
Hello,someone knows if there is another reason (copyright, taxes etc.) than corona for the (very) limited availability of CBS350 devices in Germany?We are migrating from SG300 devices to CBS350 devices and now we have to stop the project at some loac...
Hello,we have the problem that we switched from SG300-10MPP to CBS350-8P-2G. So far so nice but the PoE power budget is now calculated in real time and is blocked. Before we could power our access points easily because the real power amount was count...
Hello,we were looking for a software to manage our several Cisco Small Business switches. So for that reason we got the tip for "Cisco Business Dashboard". For now we provided credentials in it and our SG300 switches are already in the inventory. But...
Shortly we introduced a new Unify VoIP PBX. We generated a Voice Vlan on our SG300 and SG500 Switches (Vlan 100 tagged).
Now if we put a VoIP system telephone in an unconfigured port on our switch the port configures itself to vlan 1 untagged and vla...
Thanks to Cisco support it now works. Sometimes these are the little things which are needed...example working configuration:snmp-server serversnmp-server engineID local defaultsnmp-server location "Location"snmp-server contact “contact”snmp-server c...
It is getting even worse. The new C1300 series has this limit, too. For us this is also a problem we currently found out. We have some switches from the SG550X series with more LAG uplinks, too... OK, it has to be a new hardware vendor for the next r...
"Final" message to this with TAC:[quote]I am not sure what is your observation over SG300 switches, but in our lab tests we see that SG300 switch does not negotiate power over CDP/LLDP. In that scenario the switch does not allocate power and PDs get ...
Look at that, Cisco finally got sick of us... Got 2 switches (8P-E-2G and 8FP-E-2G) from distribution. The upper one from 2022 is the old design, the lower one is from 2023 and has the "normal" rack alignment like we all know it since anytime...So if...
