About Nuno Pimentel dos Santos

Nuno Pimentel dos Santos · 06-06-2017

My 2960-24LT-L refuses to boot properly. I've done all I can and it continues to do as it pleases. Here's the log: --------------BEGIN------------------switch: set?=BOOT=flash:c2960-lanbasek9-mz.122-55.SE11.binBOOT_FLAGS=c2960-lanbasek9-mz.122-55.SE...

Nuno Pimentel dos Santos · 08-09-2017

Strange! My 887VA-M has a small 48VDC - 1.67A PoE conector port just right to the (blue) console port. And thus, left to the 12 VDC - 5 A power adapter conector.

Nuno Pimentel dos Santos · 06-21-2017

You'll notice I've renamed config.txt into .old. But no luck with that too.

Nuno Pimentel dos Santos · 06-21-2017

switch: dirList of filesystems currently registered: bs[0]: (read-only) flash[3]: (read-write) xmodem[4]: (read-only) null[5]: (read-write)switch: dir flash:Directory of flash:/ 2 -rwx 1...

Nuno Pimentel dos Santos · 06-09-2017

Configuration register is 0xF Complete display (this is NOT a joke, I'm seriously dumbfounded): Switch>sh verCisco IOS Software, C2960 Software (C2960-LANBASEK9-M), Version 12.2(55)SE11, RELEASE SOFTWARE (fc3)Technical Support: http://www.cisco.com/...

Nuno Pimentel dos Santos · 06-07-2017

If you look at this bit you'll see it: " The system is unable to boot automatically. The BOOTenvironment variable needs to be set to a bootableimage. switch: " It does not do a recursive search of the boot file, as it should, but when i type: switc...

Member Since	‎03-04-2016 09:22 AM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	7

User Statistics

User Activity

The system is unable to boot automatically.

Strange! My 887VA-M has a

You'll notice I've renamed

switch: dirList of

Configuration register is 0xF

If you look at this bit you