Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello ISE experts,May I ask how to set up Cisco ISE to auto-restart after a power outage? Thanks in advance.My Cisco ISE Version is 3.1.0.518 with Patch 6Regards,Jerry
Hello All, I encounter a problem regarding openvpn connection via ISR router. Simply put, there is one device resided in the LAN side of ISR Router which would be acted as openvpn client. This client is supposed to initiate and actively establish vpn...
Hi All,I am configuring my brand new ISR c1111 router functioning as network gateway. I use LTE as the WAN side connection. Upon activation and configuration of the LTE module with SIM inserted, I am able to access to Internet from the LAN side throu...
Thank you Sir. By following this power restore policy config guide, I have configured and tested this auto-power on feature of Cisco UCSC appliance successfully.
Sorry Sir my bad. I'm using Cisco appliance UCSC-C220-M5 (version:C220M5.4.2.3c.0).I can find out the option of "Advanced Power Management Configuration" from BIOS setup page under Advanced --->Socket Configuration, however, there is nothing configur...
Hello Sir, It turns out that Port 443 is listening for the incoming traffic by default thanks to https application I guess. Regarding my problem, it is solved and not related to the router configuration. Thank you for your suggestion.
Hello Paul, 1) "NAT/PAT doesn’t like access-lists it relates to with a "any any" as anomalies can occur in translation, So its recommended to be as specific as possible regards when a host/network requires translation with the access-list" Totally ag...
Hello Richard, Your input regarding "login local" with aaa new-model is pretty informative to me. And I am totally on the same page with you about the use of standard access list for the nat configuration. Thank you for your reply and suggestion. The...
