Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have noticed that I am unable to select an C1300 switches when in the job scheduler menu for any task. The module allows me to select any other switch, such as SG or CBS type switches. Are the C1300 switches not compatible with the job scheduler in...
I have a CBS 350-8FP-2G that is running the current firmware of 3.5.0.24. I am trying to get the embedded probe to connect to our current up to date CBD server. Based on the switch, the probe version is 2.9. When trying to connect to CBD, it gives me...
I have a probe that is incorrectly detecting two switches that do not actually exist for the company. These two switches are not even reporting to the same subnet as the probe. I have confirmed without a doubt that the switches CBD thinks are online ...
Hello, we currently are running a CBD server on version 2.8.1.20240508. I have noticed that with the current firmware for the cisco switches, that the embedded probes and the virtual machine based probes are not running version 2.9. I am working on p...
I have a probe that I have tried configuring as a linux VM, and an embedded probe. Both cases the probe says it is connected completely, but the CBD portal shows no probes are online. I have made sure that the network is wide open for the probe devic...
Hello,
They are managed by a probe, and the probe versions do vary, but most are version 2.8 or higher, which according to the spreadsheet provided, should be compatible.
In the topology view, they are not directly connected to another managed switch. They just connect to a cloud icon saying "Unmanaged network" It is also worth stating that the two ghost switches report on a subnet that this CBD probe is not physicall...
Hello,
They are both Cisco switches. Specifically both reporting as a CBS350-24P-4G. The discovery method is "LLDP MAC Address Table CDP Bonjour(Cisco) ARP"
Thanks
