Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I use a CVPN3000 behind a PIX Firewall (the Public interface is statically 'NATed'). I try to establish a VPN session via Internet using a Cisco VPN Client : I indicate the NATed IP address of the CVPN3000 as the VPN Server.I have this error message ...
Hello,I would like to create a L2TP over IPSEC tunnel between my Windows XP Pro PC and a CVPN3000 via Internet. PS : My PC is behind a PIX Firewall with a static NAT.I followed this Cisco configuration Example but the result is a simple L2TP connecti...
Question : How to add a AAA authentication of the users' Remote Site?I Have a VPN established from a Remote Site with Cisco 837 EasyVPN Hardware Client to a PIX515e EasyVPN Server of the Central Site. Please find below config filesPS : I have CiscoSe...
I use :- Cisco 837 as Easy VPN Client devices on remote sites- Cisco PIX 515E as Easy VPN Server on central site- CiscoSecure ACS as TACACS+ Server on internal LAN of Central SiteThe remotes sites connect to central site by ADSL with 3DES VPN Tunnels...
I have this configuration :- Servers and Gateways are on VLAN 1- PCs are on other different VLANs (1 for each Department)I want all VLANs to have full access to VLAN 1 (mainly because of servers to be accessed by all the PCs) but I would like that PC...
Hi sasa,It works! Thanks for your help.PS---To enter the VPN login password information:You can't store it on the EZVPN Router Client with the "username password" command (the PIX eZVPN server doesn't allow it). So you have to manually enter it durin...
Thanks Sasa.With this config, the users inside the Remote Site will receive a popup to enter username/password before the VPN tunnel can be established?The objective is :- Authenticate individually the users before the VPN is establishedor- After the...
Hello sstudsdahl,Thanks for your help. But in Catalyst 3550 switches you cannot activate IPX routing, so Novell traffic to VLAN Server is blocked. Also, Other Windows broadcasts traffic like Netbios are also blocked. For the others servers I dont kno...
