I'm really new to 15454. Now I can configure my client circuits with OCHCC. But I wonder about the criteria on when to configure as OCHCC and when to configure as OCHNC. Please advise.
I tested with 122-25.SEB3, I could create route-map with tracking option but I could't apply it to the interface. the error message shown "PLATFORM_PBR-3-UNSUPPORTED_RMAP"Does it mean I can't put the multiple tracking route-map to the interface.Since...
I mean some time we have some need to turn inside interface of PIX firewall to remote site and turn outside interface into inside of HO. If we strictly aware the traffic with ACL, what's else we should concern or any reason to prohibit turning around...
If we accidentally put the too strong signal(more than -8 dBm for ONS15540). Could it damage both optical mux/demux and the transponders? On my understanding, since the optical mux/demux is passive optical component then it should be able to stand th...
I have some need to run OSPF on PIX and also try to have stateful failover between both boxes. I found that for connection with static route or connected route, the stateful failover was working well. But with OSPF running, the takeover PIX have to r...
Yes, I'm already done with SDM. I can configure PBR with simple route-map on this box but I can't configure(apply) PBR with the route-map with tracking nexthop option on this box.Thanks for your suggestion.
