Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,
Can someone help me with the config below?
I can leake /24 prefixes but when I do /32, it doesn't work.This needs to happen on Switch not on router.- Please check the attachment.
ip vrf CORPORATErd 65000:100export map CORP_FILTERroute-ta...
Hello, I have a weird setup that I couldn't make it work actually. I might use another set of eyes. Description: I have 2 VRF configuration in switch. One of them (Corporate) has BGP neighbors on upstream routers to get all corporate services from Da...
Hello All, I have more than 150+ AP in my corporate network and when I tried to add a new one, it gives me this error during the discovery. AP Model: AIR-AP2802E-Z-K9 AP Running Image : 8.3.143.0 [*07/26/2021 03:00:07.7717] CAPWAP State: Discovery[*0...
Hello Everyone, I have been trying to get some reports of my Guest wifi users. On the controller gui, when you select the clients you can see everything about them except for the username.Username says "Unknown". I assumed this should be populated as...
Having the same bug on our 92xx Oct 1 2019 00:34:02.902 UTC: %SNMP-3-RESPONSE_DELAYED: processing GetNext of ciscoFlashFileEntry.2 (8368 msecs)Oct 1 2019 00:34:10.777 UTC: %SNMP-3-RESPONSE_DELAYED: processing GetNext of ciscoFlashFileEntry.2 (7876 ms...
Hi Harold,
I have deleted route maps and re-added.
now it is working.
Thank you all your help.
Switch#sh ip route vrf CORPORATERouting Table: CORPORATEC 10.70.70.0/30 is directly connected, Vlan970L 10.70.70.1/32 is directly connected, Vlan970C ...
Hi Harold,
sure, please see below.
switch#sh bgp vpnv4 unicast all 10.100.100.100/32BGP routing table entry for 65000:100:10.100.100.100/32, version 86Paths: (1 available, best #1, table CORPORATE)Advertised to update-groups:11Refresh Epoch 1Loca...
Sure thing.
Switch#sh bgp vpnv4 unicast allBGP table version is 87, local router ID is 10.70.70.1Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,r RIB-failure, S Stale, m multipath, b backup-path, f RT-Filter,x best-e...
Hi Harold,
no luck.
As I am redistributing connected networks into BGP under respective vrf's, I dont think the issue will be network statement.
I also removed the default route advertisement from router to keep this routing to be occurred within S...
Hi Harold,
sorry still not accessible.
VPCS> trace 10.200.200.200 -P 1trace to 10.200.200.200, 8 hops max (ICMP), press Ctrl+C to stop1 10.100.100.1 12.619 ms 8.363 ms 8.931 ms2 *10.100.100.1 8.898 ms (ICMP type:3, code:1, Destination host unreac...
