Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello All,I am hoping someone could help me out with an issue that we have with dropped packets. Cisco TAC for our ASA has determined it is not an issue with our firewall and that it is an issue with the ISP. So here is the issue.We have a /29 block ...
Hi Guys,I am trying to figure out why we have Mac flapping on our network. Core B is reporting that that two hosts are flapping between the port for our wireless controller Gi1/1 and the etherchannel for the Server Switch. Both hosts that it is repor...
Hey Guys, I hope someone with better spanning tree knowledge can help me out here. I will show you the picture of the network first and this medium size network is mostly in VLAN 1.The first thing that I was triggered to is there is excessive unicast...
Hey Guys,I need some advice on subnetting a network. I work for a medium sized organization and we are experiencing difficulty with broadcasts. We only use vlan 1 so we can hear every broadcast that every device does. We do have vlans used to totally...
Hello Markus,Well, I would say lets not focus on that right now unless those NAT statements are a problem with the actual issue I am having. Let's put the DMZ aside too.Two servers on the internal network / same local subnet that both require port 44...
Thanks Rick, you are correct. But it's not that it sometimes work. As I am pinging google from my desk in the internal network and I start using anything to do with those other IPs... whether I set the DMZ to use one of them as the source address to ...
I am not sure it ever worked before. Our RDS server always had issues over port 443 but it doesnt get used much. It was until I moved the RDS to a DMZ, the FTP, and had another network using port 443 that the problem got real bad.Sorry, I was using A...
Yes speed and duplex are fine.I connected a laptop to our modem and tested with two different IPs (one at a time) and there were no issues. The issue only occurs when i am trying to access two IPs over the same connection at the same time so this get...
