Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a C9130AXI that won’t complete an APSP upgrade. It joins my C9800-CL, fails to unpack the new image because its inactive partition is full, and reboots every ~4 minutes. Two other C9130AXIs on the same WLC upgraded fine. I think part1 is full ...
I have a deluxe package, my IP is updated and correct, and I have NX Domain Redirection DISABLED, yet I am still seeing the OpenDNS Guide when I type in an incorrect URL.
This has just started happening after years of use. What's going on?!
Thank you very much for posting this. This fixed the same issue for me.Yes, no access to boot loader, same thing you had, but not of concern for now as EWC is gone and CAPWAP is finally working.Thank you.
Well, you sir are a star! You ultimately led me to the fix. Turns out 17.15.5 and ONLY 17.15.5 has code in it to remove the EWC WLC image. CSCwr28871 clearly states 17.15.5 as the only known fixed release. And indeed it is.I followed this post and it...
Thanks @Mark Elsen, very helpful and this is what I feared. Given this is a show-stopping bug, is there any way to get access to a TAC to get devshell access? A support contract, even if one could be had for this AP, would cost more than the AP itsel...
@Rich R if you have time, would you mind taking a look? I hear you're the person to speak to around here Would be very grateful for any pointers. Thank you.
A factory reset (“clear fips flag”, 30s+ mode-button hold) runs a DATAWIPE that deletes and recreates both partitions as empty UBI volumes — but the AP then repopulates them from the installed software on next boot! So the EWC leftovers return and pa...
