Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
when disable-early-media 180 is configured CUBE sends sip bye message as soon as an SIP OK (call answered) message is received, CUBE is between non cisco SIPserver and ITSP functioning as an SBC, the ITSP send early offer for all inbound calls and SI...
is it possible to have CUBE generate ringback for all inbound calls regardless of whether the call manager behind it can generate ringback tone or not ? if yes how to configure CUBE to do so without disabling early media 180.thanks
CUBE is not transparently sending in incoming ringing(180) with SDP to an outgoing ringing(180) with SDP but it converts it to session in progress message (183) which causes problems, we are using IOS version adventerprisek9-mz.151-4.M3 on cisco ISR ...
yes clearly both have SDP, but the question was why CUBE does not allow for sip 180 message transparency instead of converting it to 183 ? as IETF SIP standards do not mandate this behavior
below is an output of debug ccsip messages that proves itReceived:INVITE sip:2188723@10.3.3.3:5060 SIP/2.0Via: SIP/2.0/UDP 10.11.1.2:5060;branch=z9hG4bK1D7B3Remote-Party-ID: <7777>;party=calling;screen=no;privacy=off</7777>From: <7777>;tag=37DDA4-12B...
Late-to-Early Media Interworking is different from Delayed Offer to Early Offer and this was not my question but thanks any way, maybe some one has an answer to this question.
