Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I need to configure a Cisco IOS router (891 or 1100) as CPE on a FTTH connection. This line is a IPv6 DualStack-lite (DS-Lite) connection where I get a IPv6 on the WAN interface over PPP.Now I need some kind of tunnel config for the B4 (Basic B...
Hi Community, I've got an issue with a Nexus 5k/2k - I'm trying to disable VTP on a dedicated Port just to be sure a switchfrom a different vendor won't talk VTP with our network.Regarding docu the per-interface command "vtp" and "no vtp" is implemen...
Hello Community,Can anybody tell me, what happens to CoS Markings of a Cisco-IP-Phone connected to a Switch (3560/29xx/...)without any specific QoS/AutoQoS configuration on this port?If I configure AutoQoS, the Switch will trust the markings and does...
Hi there,I've got big problems setting up a VSS with 2 6509-E with ONE sup2T in each 6509.I started configuring the 2 SUPs like this: http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/vss.html#wp1055688VSS confi...
Hello,
same Problem here with 1.0.1.4 and also the new 1.0.2.2
with 1.0.0.39 it is working - but the performance is not "feeling" good.
I've got also Problems with some older notebooks with intel-wifi card (b/g).
with my 10 year old 2112 and some 1...
Hi Joseph,your statement seems to be correct. unfortunatly I also can't find any documentation about this behavior.anyway many thanks for your help!greets,Chris
Hi Joseph,many thanks for your fast answer. Do you have any official cisco-references regarding this behavior?I have to present this Information to my boss and it would be great to have an official document.Of course I searched already on cisco.com a...
24 APs will bring your Power-Supply of the switch to its maximum limit.The 2960-24PC-S is able to deliver 370Watts of PoE Power which is 15.4 Watts per Port (full 802.3af-Power)In the Docu for AP1140-Series you can find:Power Draw• AP1140: 12.95 WNot...
Hello Zubair,check the logs of your TFTP-Server if the switch tries to get the file. If you can't see any tries than there must be something wrong with your IP-Config of cabling between TFTP and Switch.If the switch tries to get a file and can't get ...
