About Alessandro Ballestriero

Alessandro Ballestriero · 10-24-2012

Hi Guys,i try to configure a wccp service ( for redirect web traffic to content filtering ) in user profile using radius on VRF.In a radius server i add the following avpair:test Cisco-AVPair += lcp:interface-config=ip wccp vrf RACC_XXX we...

Alessandro Ballestriero · 05-03-2012

Hi Guys,i try to configure a BRAS solution for PPPoE/A termination.When try to connect a client i receive the following error:----------------------------------------------------------------------------------------------------------------------------...

Alessandro Ballestriero · 04-27-2012

Hello GuysI have a rather strange problem with a 7204VXR (NPE 400): running a sh int giga 2/0 on the output see several inputs errors with the respective drops.I have some losses on icmp packet. The router si direct connect to Catalyst 6500 Any idea...

Alessandro Ballestriero · 05-03-2012

I have found the problem ....Framed-Compression := Van-Jacobsen-TCP-IPForce the virtual-access mode to full.Many thx Manuel.

Alessandro Ballestriero · 05-03-2012

Hi Manuel,thanks for your answer.Below the other attribute send from radius to ASRFramed-MTU := 1488MS-Primary-DNS-Server := 62.97.32.21MS-Secondary-DNS-Server := 62.97.33.21Framed-Protocol := PPPService-Type := ...

Alessandro Ballestriero · 05-02-2012

Thanks for the answer PaoloWhat they do not understand is why on another 7200 ( same configuration of hardware and software ) where I have the same volume of traffic is not reflected some losses. Below the output: GigabitEthernet2/0 is up, line pr...

Member Since	‎04-27-2012 07:07 AM
Date Last Visited	‎09-18-2018 11:26 AM
Posts	6

User Statistics

User Activity

WCCP on virtual-access subinterface ASR 1002

ASR 1002 PPPoE/A Virtual-Access subinterface problem

7204VXR (NPE400) GigaEthernet input error

ASR 1002 PPPoE/A Virtual-Access subinterface problem

ASR 1002 PPPoE/A Virtual-Access subinterface problem

Re: 7204VXR (NPE400) GigaEthernet input error