Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have an ACE load-balancer for 3 web servers. One server had issues and internal users kept getting to the webpage fine, while an external customer who connects through the firewall using a natted IP could not get to the webpage. I have 'cookie ins...
I have a site with a pair of ASA, a core switch (4510) and 6 layer switches attached to the core. From outside, I can ping all devices except the core management IP. I canget to the core from the firewall or the access switches. icmp any any and repl...
I have the following configuration on Cisco 6509:int gig xx/xxswitchportsw acc vlan xxNow, I want to make this int a trunk port.When put the command: sw tru enc dot1q, it gives me the "Unrecognized command" error. Anybody got an idea on how I can fix...
here are the config of the interfaces on the core:Vlan201 is up, line protocol is up Hardware is Ethernet SVI, address is 5475.d0ef.d37f (bia 5475.d0ef.d37f) Description: management ip Internet address is 192.168.1.3 MTU 1500 bytes, BW 1000000 Kb...
I attached the diagram.Here the scenario:From my desk:- I can ping the firewall fine-I can ping all layer_2 switchesbut I cannot ping the core switch.From the layer 2 switches:I can ping the coreI can ping my pcFrom the core switch:I can ping the fir...
Here is the packet-trace result:Phase: 1Type: CAPTURESubtype:Result: ALLOWConfig:Additional Information: Forward Flow based lookup yields rule: in id=0x6fb43078, priority=12, domain=capture, deny=false hits=636533, user_data=0x6f2e4548, cs_id...
