Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HelLo !Could you please help me. I am testing asa 5505 with any connect client. Client authentication works fine with local database and against ldap server. But i cant get radius authentication to work. we have external radius authentication and it ...
Hello !Could you please help ? we have cisco3640 as nas, cs acs 2.6 as radius-server.Now we would need to forward authentication request to another radius-server ( username is unknown to the acs) Username is provided with a certain prefix and accordi...
Hello could you please help me.we have several ports broken in cat 3548 xl ( fast 35,37,38,39) when we are trying to connect new workstations to them, ports do not work. there is over 80 procent packet loss.all other ports work ok.Do you konw if ther...
Hello could you please help. i would need to enable cos or dscp in our 2950. in fe there is a device which traffic needs to be prioritized and put i out gig interface. I do not understand your manuals could you please tell me if i am wrong if i do ...
Hello !Could you please help us. we have acs 2.6 and we would need to move or copy user/group and parameter data from acs to windows 2003 ias-server.Is this possible for example via rdbms synchronization ? Or via csutil ?Any help is appreciatedThank ...
Thank you for your reply !Yes, we have the spanning tree portfast enabled in all access-ports.Laptop has only 10/100 nic-card.The funny thing is that same laptop/printer work fine in the same switch in another port and of cource in other switches. I ...
Hello all and thank you for the replies !i can now open the referred cisco-page. I will check the pageHere are anwers to all questions. we will boot the switch as soon as possible and see what happens.do you know a good debug command what to use to s...
Hello thank you for the fast reply.there are no errors in any port counters, normal ping loseses 80 % of the packet.switch has been up for 39 weeks, mayby we will boot the switch and check the ports again. there were no post errors last time switch c...
Thank you for your reply ! Could you please answer my claryfying question ? So if i understood correctly i only need to mark the packets coming in from int fast 0/1 and then configure queueing. if the packet is going out through gig 0/1 i do not need...
