Hi,when you started the download, did you mention the destination filename? Like in this example?Issue the copy xmodem: flash:filename command on the switch.Here is an example:switch: copy xmodem: flash:c2955-i6q4l2-mz.121-13.EA1.bin
Begin the Xmodem...
Hi,can you please doublecheck the sequence you used with this documentation?http://www.cisco.com/en/US/partner/products/hw/switches/ps628/products_tech_note09186a0080169696.shtmlit included the 3750 Series.regrads,michael
Hi,if you delete the NVRAM content, the image itself should still be on the flash:Have you tried what you see in the ROMmon with "dir flash:"?I assume the image is still present, then try to start it manually with " boot flash:/dir/image-name.bin".re...
Hi you are using the wrong IOS on the Router. Please refer to the hardware/software matrix. For the NM-1FE2W you need for a 3600:NM-1FE2W= 12.0(7)XK, 12.1(1)T, 12.1(5)YB, 12.2(1), 12.2(2)T
