Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
i have installed an IPS-SSM Module in the ASA but the module status is unresponsive. i tried to boot from tftp server many times using hw module 1 recover boot. but it doesn't work.the tftp server and the sensor are in the same subnet and vlan.i con...
i am deploying NAC as layer 3 OOB Real IP Gateway using ACL. i have a problem that Agent doesn't try to communicate with CAS untrusted interfacei enabled logging on the Switch and i found that NAC agent sends udp requests to its default gw (interface...
i am using Cisco NAC OOB. i found that after user is allocated to his normal user Vlan if he disabled the anti virus Cisco NAC doesn't take any action and the user remains in his normal user Vlan. i expect that NAC will move the user to quarantine Vl...
we are using NAC L3 OOB Real IP Gateway to redirect HQ and Branches traffic to CAS. we are using PBR to redirect traffic. when user try to access network CAM puts him to AUTH VLAN but when opening browser no redirection happens. i opened CAS untruste...
Thanks Nate. I installed wire shark on the agent machine to inspect agent traffic.I see that the agent talks to the GW on udp 8905 then to CAS untrusted interface on udp 8906 but nothing happensNo agent authentication was triggered. Also in don't see...
