Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello Everyone,
We have a network which consists of 23 Cisco 2960 (old) access switches which are connected to Cisco 6800 Core switches set in VSS. Some of the access switches are connected directly through one link to the core switch while others ...
Hello,
I am running a CT5520 WLC with GLC-LH-SMD transceivers; the port state is always down.
Are the GLC-LH-SMD compatible with the CT5520 WLC?
Regards,
Hassan.
Hello Georg,
As requested please find below the output of the show VTP Status on each of the switches:
###COre Switch Show VTP Status###
CSW1#show vtp statusVTP Version : 3 (capable)Configuration Revision : 102Maximum VLANs supported locally : 10...
Hello Georg,First thank you for your reply.Regarding the STP i did not check the priority neither the revision. However while checking the STP on the core switch its clearly stated that he is the root.On the other hand when it comes to the VTP status...
Hi Everyone,
Following are my findings regarding this issue:
The use of GLC-LH-SMD only will not sort the issue, the port will stay down.The use of GLCT on port#1 and a GLC-LH-SMD on port#2 will sort the issue, both ports will be up and running.
NOT...
Hello,
I have upgraded the WLC to the 8.2 version, the problem is always there.
Following to the 5520 WLC deployment guide LINK, for the GLC-LH-SMD to work it needs a GLCT plugged in the port number #1.
Is the existence of a GLCT mandatory ??
BTW...
