Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,Is it possible to have context in transperant mode and routed mode. Means if i need three context then 2 of them is in routed mode and one of them is in transperant mode. If yes then how, i can 't find this info in cisco website.???I am havin 5585...
Hi Guys,Here is the config uration of my admin context on asa 5585 with 8.4 versionhostname FW-MAINdomain-name bc.comenable password xxxxxxxx encryptedpasswd xxxxxxx encryptednamesname 10.0.0.0 xx-Aname 172.16.0.0 xx-Bname 192.168.0.0 xx-C!interface ...
Hi,Is it possible to forward all MARS logs to another server. Issue is that we already have cisco mars and now we have implememted splunk. So instead of change logging device on all equipments i need to forward logs to splunk server.If possible how?...
Hi guys,Please see the attached diagram.I am having a server LAN in 10.216.153.0/24 and from here server have to reach other server LAN beside ASA 10.123.252.0/24in between is 6500 sw with FWSM module. And i have created a context for this in transpa...
Hi,We have ordered telephone system from a third party, and we found that whenever some one called we get ipcc 999xxxxx number as incoming number. And the guys who delivered says it is not possible to get incoming number on cisco phones since is call...
Hi, I found some more info see at this documenthttp://www.cisco.com/en/US/partner/docs/security/asa/asa84/command/reference/ef.html#wp2016768 Usage Guidelines In 8.4(1) and earlier in In multiple context mode, you can use only one firewall mode for...
thnx Varun, but does that means that since my system configuration says that firewall is in routed mode than all context created will be in routed mode!!!????No way to have mix mode!!!
I guess above steps that you mentioned are for switch called vnl-msw58-trf1. I tried it on the switch but following commands are not supported under class-mapmatch vlan 5match class-map class-defaulti am running following iosCisco IOS Software, C3...
