Hi all,
I have configured option #43 for mitel phone on cisco asa. but the phones are not getting the ip address from the dhcp.
this is the command on the asa
"dhcpd option 43 ascii id:ipphone.mitel.com;sw_tftp=64.28.118.9;call_srv=64.28.118.9;l2p=6v...
I have a cisco ASA 5505 configured with dynamic lan to lan vpn. but when I connect it to DSL modem, I loose the connectivity. I am not even able to ping google dns.
I have a new 2960X(Stack Switch). I copied running config from 3650 and ran it on 2960. the config ran smoothly but now I am not able to run the following commands on the switch:
"show run"
"config t"
Any Idea?
Hello all,
I have cisco 2960 switch on my table and connected to it via console cable, i also have tftp server running on my laptop (win7) but cannot ping tftp from switch.
can somebody assist how can i upgrade the switch without tftp or how can i fi...
Hi Miranda,
this is a dynamic site to site vpn, and all the other devices are connecting fine. and I compared the vpn configuration on those remote devices, they are exactly the same. but this one device would not keep its vpn up. it successfully com...
Hello Palani
this was a big helps, thank you so much. I know what the problem is now.
I also found this line in the config.
line con 0 exec-timeout 0 0 privilege level 2
thanks for making my life easy :)
