Hi Experts. I have faced issue with module 3 before some days, below logs is generated on device and its looks like software but unable to isolate issue because kernal dump file is corrupt.. Need your help to find RCA. LC/0/1/CPU0:Apr 7 23:20:54.827...
Hi Expert ,
Need your help for below erros , which i am getting while configuring vlans to port-profile when in port-channel
DMZCSW41G01-enable(config-port-prof)# port-profile type port-channel server_poDMZCSW41G01-enable(config-port-prof)# switc...
Hi Experts ,
we have network like , 2 x N5k is connected to 7k , there was module 1 was faulty module 1 faulty on N7k and after replace the module we are facing port down issue .
Nexus 5k error logs is indicating ports down due to UDLD empty ec...
HI Expert ,
i am planning to upgrade one of our production switch from 3:5:3E to 3:8:x , i am going to follow below process
(1) copy tftp://<TFTP IP address>/<filename.bin> bootflash:
(2) boot system flash bootflash:/<filename.bin
(3) no boot...
Hi Expert ,
i am planning to upgrade the ios for cisco 4500 switch ( 1 rack chassis ) which is in vss , from 03.05.03.E to 03:08:x ..
i am going to follow the below steps , but when i did upgrade last time ios upgrade i faced vss break issue
...
Module recovered automatically it self, even dump is also generated but unable to decode that file due to corrupt. i am also suspecting some issue software only but i don't have document to prove that. Thanks
Hi Paul , I was checking configuration guide and found something interesting , let me try that .. Will get back to you and keep update you if it is works .. Anyways thanks for you help :-)
