Hi. On page 143 of the official ccna voice cert guide there Is an example of a translation profile where calls from the PSTN with DID range of 6xxx should be converted to 5xxx to reach the internal network.There Is an explanation of why the called ru...
Hi.I have a uc540w configured in a small business via CCA. I'm studying for the CCNA voice now and am trying to make sense of the uc's running config.I see that most of the translation profiles use a "calling 3265" rule but I can't find this r...
Hi. I was wondering how the phone config files are downloaded via TFTP If we don't specify tftp-server flash: for each file like we do with the firmware etc. Is It enabled by default for the config files when we use the cme router as the tftp serv...
I'm sorry for reposting this but In the original discussion , I accidentally marked one of the answers as correct and I don't know how much that affects someone taking another look at the discussion.I have a problem with calls going through to...
Hi.A small company were maintaining that uses a uc500 on a dedicated voip line suddenly can't make outgoing calls.This has occured on another two occasions when they were using a different ISP and It was due to them not paying their bill on time.This...
Ok. I think I get It now. It Just came to me after reading your answer a couple of times. I also knocked my head on a shelf and that seemed to help too. Thanks!
Hi. Here's my running config.I've attached It also. Building configuration...Current configuration : 32419 bytes!! Last configuration change at 19:54:01 EET Wed Feb 12 2014 by yembros! NVRAM config last updated at 20:04:03 EET Wed Feb 12 2014 by yemb...
Hi. I checked the tftp-server files In the run output but they're not In there. They are shown In the tftp-bindings command however. Why Is that ? Edited: Silly reply.You Just explained to me why that Is ! UC540#sh run | include tftp-servertftp-serv...