Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello All,I have a requirement as below:One of my client is using Two 3 com core switches running VRRP as next hop redundancy protocol. This is a bank so there are a lot of servers connected directly to both the core switches. The requirement is that...
Hello All,I am installing a new LAP (AIR-CAP3501I ) through the wireless lan controller (AIR-WLC2112-K9) with software version 7.0. I have an external ADSL modem which will act as the DHCP server for the wireless clients and the LAP. Please find my n...
Hello Vincenzo and Marwanshawi,Thank you for your valuable inputs. Really sorry for the very delayed response. Was on a long vaccation Can I Have a pair of Nexus 5548UP with Nexus 2248TP with vPC ?Nexus 5548UP will be the Core with L3 daughter card ...
Hello Vincent,Thank you so much for the detailed explanation.I have few more queries as below:1. For both Any connect and Secure connect SSL VPN irrespective of the client (IPhone/Android), Do we have to purchase any license on the Cisco ASA to allo...
Hello Vincent,For Cisco Jabber on hand held devices (IPhone/Android) apart from Wireless and SSL VPN (to register itself to the CUCM/CME from outside the enterprise Network), Is it possible to do a SIP trunk from these hand held devices to the CUC...
Hello bbxie,Thanks a ton for your kind help !!!! It worked after changing the regulatory domain in the WLC to match with the LAP.After that the LAP just joined the WLC without any issue and everything worked fine.Thanks again.God bless you Mohammed ...
Hello All,I have few more details as below, hope this might help fix the issue:The below output is a part of the command " sh tech" from the controller:1#interface address ap-manager 192.168.1.2 255.255.255.0 192.168.1.254 interface address managemen...
