Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We recently upgraded our switches and have started seeing issues with BPDU delays and consequential loop guard activations on switches. This is not impacting switches connected directly to our core, but only switches that are downstream of other Mera...
I have been reading the article below which outlines migration to IOS XE and am not understanding if I need to configure an L3 SVI on our management VLAN prior to performing the upgrade.We currently run a fully layer 2 configuration with no SVI's wha...
I'm in the process of testing WPA3 and WiFi7 in some of our networks and one thing I'd like to better understand is the use of the GCMP 256 cypher suite and what implications come with it. Anecdotal evidence from my testing has shown that while WPA3 ...
I'm currently testing WPA3 on some of our networks and am questioning if I'm interpreting some of the Meraki documentation correctly.The below explains how transition mode works for WPA3 on Enterprise security setups."WPA3 Transition mode for 802.1X ...
At present, if you'd like to implement OWE Transition mode for a specific SSID in Meraki dashboard, you must configure it alongside a second SSID which is open with no encryption. I'm curious if there are plans to introduce an OWE Transition mode whi...
Hi, we have seen significant STP instability after upgrading to MS 18.1.8.1 and have strong evidence to suggest there is a control plane issue in this firmware which is causing BPDU broadcast delays and consequently resulting in loop guard activation...
Just bumping this. Of the logs I have seen and exported I now have substantial evidence to suggest there is a control plane issue affecting BPDU broadcasts in MS 18.1.8.1. STP instability within the network has increased significantly after updating ...
Thanks for the reply.The reason I believe the new firmware caused it is that we staged the upgrade based on switch model across the network. All Catalyst and MS120/MS130 switches happened the day before the MS225's, and based on the event logs of swi...
