About tresatony

tresatony · 01-23-2008

Hi,I am getting following error when I boot 7206VXR router with NPE-300 from rommon*** Bus Error (Load) Exception ***Access address = 0x826e5bc1PC = 0x8000af3c, Cause Reg = 0x1c, Status Reg = 0x3040d003monitor: command "boot" aborted due to exception...

tresatony · 01-23-2008

Hi,I am planning to upgrade BootLoader image of 7206VXR router due to booting issue. The router is not booting .But if I go to rommon and give boot it will boot.So I am upgarding my Boot Loader image. Now the Bootloader image and IOS image are exactl...

tresatony · 01-23-2008

Hi,You mean issue with flash ?Could it be a problem with I/O controller ?or could it be a problem with boot loader image. Only somtimes this error is dispalyed when booting from rommon. The booting is not booting with IOS image . No error message I a...

tresatony · 01-23-2008

Hi,The config register is 0x2102 and the boot system is also configured correctly.Thanks

Member Since	‎07-09-2004 08:28 PM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	4

User Statistics

User Activity

NPE-300 7206VXR boot failure

7206VXR Boot Loader Image upgarde

Re: NPE-300 7206VXR boot failure

Re: 7206VXR Boot Loader Image upgarde