Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am in the process of migrating my config from my PIX running 8.0(4) to my ASA5520 running 8.2(1). I have converted the config so that it is ready for the ASA. I noticed the "boot system flash:" and "asdm image flash:" command references the old P...
I'm having trouble TFTPing a configuration from my 851 Router to my computer through a IPsec VPN tunnel that this router is connected though. I am able to telnet and ping all devices on the far-end with no problem. I can TFTP a config from a switch...
I would like to update the IOS on my router 851, if it needs it but I'm having trouble determining the latest version. The unit is running 12.3(8r)YI4. The latest appears to be 12.3.8-YI2. This is confusing because it appears to be a step back. O...
I have a satellite site using a Cisco Router 800 series, with a dynamicly assigned address, behind a private network. The main site, has a PIX 515e with a statically assigned external address. My site-to-site VPN connection is up and running but I ...
I need to set up a site-to-site VPN connection between a Cisco 851 router and PIX 515E. The PIX has a static address that is reachable, but the 851 router will reside on a private network. The network's DHCP server will assign the IP address to the...
I was able to fix the problem with connecting from CCP. When I originally added the subnet to the access-list 1, it placed it below the deny statement. I re-entered the access rule and made sure it came before the deny statement. I can connect fin...
Jennifer,Executing ip tftp source-interface Vlan1 did the trick, thank you very much. To access the router I am using the address assigned to the Vlan, which is the same one I can terminal in on. Here is the section of the config you requested:ip h...
