Migrating PIX515E to ASA5520, update BIN files in config for ASA?

[RegionDist19]

I am in the process of migrating my config from my PIX running 8.0(4) to my ASA5520 running 8.2(1).  I have converted the config so that it is ready for the ASA.  I noticed the "boot system flash:" and "asdm image flash:" command references the old PIX files.  Do I need to update these or will they be updated when the ASA reboots with the new config?

[varrao · Accepted solution]

Hi,

These parameters would be different for ASA:

boot system flash/asa821-k8.bin

asdm image flash/

The boot system would decide, with which image ASA would loda after you do the reboot

and the second command decides, whihc asdm image to be used.

http://www.cisco.com/en/US/customer/docs/security/asa/asa82/command/reference/b.html#wp1359823

Hope this helps

Thanks,

-Varun

[RegionDist19]

Updated my config file to reflect the files in ASA.  Worked just fine.  Thanks.