Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi everyone,I'm planning to put a PIX 525 between our Web Server and a Database server. Let's assume the Web Server has IP of 192.168.3.5 (netmask 255.255.255.0) and the DB server has IP of 192.168.2.6 (netmask 255.255.255.0). The port I'm going to...
Hi,I have a Web server which is in the DMZ and needs a connection thru the LAN using ODBC port 1433. Is this possible and if so, what's the correct syntax and what entries do I need to make.DMZ Web server IP: 192.168.1.70LAN DB server IP: 192.168.3....
Hi all,My PIX was working fine a few months back. Suddenly it's been doing some crazy things recently. I have some servers and workstations that can't access the Internet all of a sudden. The workstations resides on the Lan interface and the serve...
Hi,We are migrating to a new T1 and I have to change all the external IP address in my port rules. Is there a syntax command in PIX that I can use to do a massive replace of only the network address (the first 3 octets) of the external IP? The host...
Hi,My company is switching to a new T1 line and I have to change all my IP settings in the Firewall. I know I can save the existing config on a floppy. I just want to know if Cisco has a software tool that allows me to take that config file and edi...
Hi Raj,Thanks for the info. In your example, you assume the Web server is the Inside segment. If my FW has the Outside, Inside, DMZ segments, can I use the Outside segment for the Web server? What is the preferred or de facto way of doing this? C...
Thanks Scott. It works. However, now I want to test out the ODBC 1433 connection from the LAN to the DMZ, what's the correct syntax?LAN server IP: 192.168.4.80DMZ IP: 192.168.2.50Thanks.TIATom
I'm going to use Kiwi Syslog to log my PIX and archive the events. What commands do I need to run in the PIX in order for it to enable the Kiwi Syslog capture its log?TIA Tom
I'm using NAT for the Servers on the DMZ. I did testing on one of the DMZ server. That server is a webserver that host a few websites. Somehow I can access those websites while the server can't see the Internet. Is that normal?Thomas
Hi Mike,Thanks for the reply. So I guess there's no replace command in the PIX firewall syntax just like the one in Notepad. If anyone has any better suggestions of ideas, feel free to tell me.Tom
