Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Experts,Appreciate your quick assistance here.My Customer is working on optimizing the environmental conditions at all his Data Center locations (Currently they are in the range 68F to 74F at their locations and they want to increase the temp to 76F)...
Experts,My Customer is working on optimizing the environmental conditions at all his Data Center locations (Currently they are in the range 68F to 74F at their locations and they want to increase the temp to 76F) . So, the customer wants to know the ...
Hi,This is a issue related to HSRP. I cannot ping the Standby HSRP router's ip from the Active HSRP router and Vice Versa. I cannot even ping the Virtual ip from either the Standby or from the Active Router.Here is the lab set up:-- R5's ethernet0/1 ...
Kanwal,Thanks for the reply. Didnt really know that there is no CLI command to check the current readings of the temperature.I saw it in one of the TAC cases - I believe I can use "show alarm details" to get the details of any alam.Thanks again,Sheka...
Hello Jorge,Thanks for the response !!Vlan 1 is allowed on the trunk links. And I cannot configure Vlan 149 as the native Vlan. Because as I mentioned, this is a production network and the other Vlans that are being allowed along with this Vlan is ju...
Glen,Thanks for the response !!I actually experienced this issue in the Production network. I set up the same scenario in my personal lab and it worked just fine.I am sorry. The HSRP config is actually under the sub-interfaces in the Production Netwo...
Rahul,Thanks for the response !!I actually experienced this issue in the Production network. I set up the same scenario in my personal lab and it worked just fine.The End routers are CRS-1 and the Switches in between are 6509s.Yes -- we tried removin...
