Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm having trouble getting VPDN working on an 887 router. My windows 7 client just gives a server not responding error.
I'm using the follwoing config.
aaa new-model!aaa authentication login default localaaa authentication ppp default localaaa auth...
887W router IOS 15.2(4)MDHCP snooping doesn't appear to be working. I have it all set up but the bindings database won't populate and basically all DHCP traffic is allowed. The server is on a switch connected to FE0, and I'm basically just trying to ...
I can't get my router (887w) to send email via smtp requiring authentication. I gleaned that the applet would not work from another thread here, which I can't find now, and a tcl script must be used. Which appears correct as user:pass@mailserver and ...
When I applied the crypto map to the dialer, this config works over the internet, since that was it's intended purpose I don't care that it's not working internally for my test.
Cheers.
Regarding the line
crypto isakmp key cisco123 address 0.0.0.0 0.0.0.0 no-xauth
That is how I entered it, the subnet 0.0.0.0 does not show up though, it just shows a big blank gap between the ip 0.0.0.0 and no-xauth. I re-did it anyway, same thing, no...
Still not working, no connection established.
The windows client is returning 809, server not responding. Wireshark shows that I'm getting StopCCN traffic back, so obviously the router is responding.
Here's a new debug log, it looks a little differen...
I was trying to connect from 192.168.0.26, and I am inside the network trying to connect to the internet facing dialer IP for testing... althought the purpose is to be able to connect via the internet from an outside network.
Is the loopback neccessa...
interface Vlan1 ip address 192.168.0.1 255.255.255.0 ip nat inside ip nat enable ip virtual-reassembly in
It's doing something, but not connecting when I try...
