Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am trying to setup my 3550 layer 3 switch to do hand out dhcp addresses for different vlans. It is connected to my router address 192.168.1.1. I setup a new vlan 3 and the dhcp pool.. The client gets a 192.168.3.2 address but am not able to ping ...
Hi,I have to setup my first flex stack and wanted to make sure I do it right. I have the physical aspect of the stack down. From what I gathered I have to setup the master switch as the highest priority and then provision the other two switches. B...
Got it. Makes perfect sense, to add the ip route and also setup the default gateway. Thanks for all your help and guidance. Really appreciate it. Have a Happy New Year.
Here is everything you asked for.Show ip int brInterface IP-Address OK? Method Status ProtocolVlan1 192.168.1.223 YES NVRAM up upVlan3 192.168.3.1 YES NVRAM up ...
Yes the clients on the 192.168.1.0 network reach 192.168.1.1 and 1.223. But nothing from the 3.0 can reach 1.0 network and vice versa. Also when I do a tracert from 3.2 to 192.168.1.1 it stops at 192.168.3.1. So there is something I am missing. But d...
Some clients and router is on the 192.168.1.0 network and the client I am testing is on the 192.168.3.0. Hope that helps.Sent from Cisco Technical Support iPhone App
