Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Cisco 887VA, IOS 15.2(4)M2ADSL 20/1 Mb/sWAN: Fixed IPLAN: 10.1.0.0 /16Connection is up and running without any access-lists blocking/allowing traffic.I'd like to modify the config, so it allows users only to http/https and domain, which works by atta...
I've got 3 ASA 5510, upgraded them all from 8.0(4) to 8.0(5) and ASDM 6.2(3)Then I found out none of the three device responded anymore to WebVPN,like there is nothing listening to https on the outside interfaceI downgraded one back to firmwate 8.0(4...
I've got 2 Cisco 2610, IOS 12.2(13)T, both not generating data. (I've also some 827 models which are generating NetFlow Data just OK, so I now everything should be working). On the Ethernet0/0 interface I've got: ip route-cache flow In the general co...
Thanks, I've used CCP before but was not too familiar with the product.Anyway, I've installed it on Windows 8 (needed some tweaks, run as admin en press F12 to switch to compat. mode)So, I did a write erase and a reload, some basic config so I could...
I've done the upgrade via the tools menu in the Cisco ASDM, one whould expect that this should be the right way, since it was specially designed for upgrading.(Ofcourse I make backups of my routers/firewalls etc. this is done on a daily basis by Kiw...
I've thought about that too and already downloaded c2600-is4-mz.122-15.T17.binBut upgrading my IOS is my last resort, since a lot of people are affected by this.The IOS version is already in te top of my first post, but anyway, this is the output of ...
